SPECIFICATIONS

Hign-concerned Chemical: none

Origin: US(Origin)

If the speedboat's infinite speed command is abnormal/or other response commands are abnormal, please try the following steps to restore normal operation.
1. Turn off the power to the speedboat and controller.
2. Turn on the power of the controller.
3. Connect the speedboat battery, and at the same time, hold the throttle (wrench) of the controller and hear a "beep" sound.
4. Release the throttle (wrench) of the controller and hear a second "beep" sound to complete the calibration work.
5.Match the frequency of the speedboat and controller.
The RC boat must match the frequency of the transmitter before using it.
1. Connect the boat battery. Within 1 minute, the transmitter turns on. Until the second beep is heard, the matching is complete. (Use carbon AA batteries, do not use alkaline AA batteries).
2. The transmitter issues a forward/turn left/ turn right command.
3. If the boat does not respond to the transmitter command correctly, repeat steps 1-3.
4.The boat correctly responded to the transmitter command , the frequency was successfully matched.
Finally, after each use, disconnect the boat battery and store the RC boat in a dry location. The RC cabin must be kept completely dry.
DETAIL